TIM Output Compare Configuration Structure definition. More...

#include <stm32f4xx_hal_tim.h>

Public Attributes
uint32_t	OCMode
uint32_t	Pulse
uint32_t	OCPolarity
uint32_t	OCNPolarity
uint32_t	OCFastMode
uint32_t	OCIdleState
uint32_t	OCNIdleState

Detailed Description

TIM Output Compare Configuration Structure definition.

Definition at line 79 of file stm32f4xx_hal_tim.h.

Member Data Documentation

◆ OCFastMode

uint32_t TIM_OC_InitTypeDef::OCFastMode

Specifies the Fast mode state. This parameter can be a value of TIM Output Fast State

Note: This parameter is valid only in PWM1 and PWM2 mode.

Definition at line 94 of file stm32f4xx_hal_tim.h.

◆ OCIdleState

uint32_t TIM_OC_InitTypeDef::OCIdleState

Specifies the TIM Output Compare pin state during Idle state. This parameter can be a value of TIM Output Compare Idle State

Note: This parameter is valid only for timer instances supporting break feature.

Definition at line 99 of file stm32f4xx_hal_tim.h.

◆ OCMode

uint32_t TIM_OC_InitTypeDef::OCMode

Specifies the TIM mode. This parameter can be a value of TIM Output Compare and PWM Modes

Definition at line 81 of file stm32f4xx_hal_tim.h.

◆ OCNIdleState

uint32_t TIM_OC_InitTypeDef::OCNIdleState

Specifies the TIM Output Compare pin state during Idle state. This parameter can be a value of TIM Complementary Output Compare Idle State

Note: This parameter is valid only for timer instances supporting break feature.

Definition at line 103 of file stm32f4xx_hal_tim.h.

◆ OCNPolarity

uint32_t TIM_OC_InitTypeDef::OCNPolarity

Specifies the complementary output polarity. This parameter can be a value of TIM Complementary Output Compare Polarity

Note: This parameter is valid only for timer instances supporting break feature.

Definition at line 90 of file stm32f4xx_hal_tim.h.

◆ OCPolarity

uint32_t TIM_OC_InitTypeDef::OCPolarity

Specifies the output polarity. This parameter can be a value of TIM Output Compare Polarity

Definition at line 87 of file stm32f4xx_hal_tim.h.

◆ Pulse

uint32_t TIM_OC_InitTypeDef::Pulse

Specifies the pulse value to be loaded into the Capture Compare Register. This parameter can be a number between Min_Data = 0x0000 and Max_Data = 0xFFFF

Definition at line 84 of file stm32f4xx_hal_tim.h.

The documentation for this struct was generated from the following file:

hal-driver/Inc/stm32f4xx_hal_tim.h

Public Attributes